Victron Battery Protector
The Victron Battery Protect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
The Battery Protect is not designed for reverse currents from charging sources.
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.
The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.
| Code | Image | Product Details | Stock | Price | Quantity | Enquire |
|---|---|---|---|---|---|---|
|
BPR000065400
|
|
BPR000065400
12V/24V 65A
Stock Level:
In Stock
|
Stock Level:
In Stock
|
$66.00
|
|
|
|
BPR000100400
|
|
BPR000100400
12V/24V 100A
Stock Level:
Pre-Order, Stock Incoming
|
Stock Level:
Pre-Order, Stock Incoming
|
$99.00
|
|
|
|
BPR000220400
|
|
BPR000220400
12/24V 220A
Stock Level:
In Stock
|
Stock Level:
In Stock
|
$169.00
|
|
|
|
BPR048100400
|
|
BPR048100400
48V 100A
Stock Level:
In Stock
|
Stock Level:
In Stock
|
$230.00
|
|
