Raymarine EV-150 Autopilot Systems
The culmination of Raymarine’s' autopilot expertise and advanced aerospace guidance technology, Evolution Ai™ control algorithms deliver a new level of accurate autopilot control. At the centre of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing.
The Evolution EV-150 Hydraulic Autopilot System Pack is a complete autopilot-in-a-box kit that is ready to install on many popular fishing and cruising powerboats with hydraulic steering. EV-150 system is engineered specifically to meet the needs of small to medium sized hydraulically steered vessels with a steering ram capacity between 4.9 cu. in.(80cc) and 14.0 cu in (230cc).
The EV-150 system is for 12-volt DC electrical systems only. The system comes complete with our p70Rs autopilot controller, EV1 Sensor Core, ACU150 Actuator Control Unit, Type 1 Hydraulic Pump, and an Evolution autopilot cabling kit.
Key Features:
- Automagic™ - No lengthy calibration procedures to perform. No compass calibration required. Plug and play connections
- Easy to install - Freedom from the restrictions of conventional heading sensors. EV sensor core can be installed above or below deck. Install upside-down or off the vessel's centre line.
- Aerospace technology - 9-axis precision monitoring of pitch, roll, yaw and heading
- Fuel efficient - Evolution autopilots steer so accurately they will save fuel and get you to your destination faster
OUTPUT
Drive Current Output | Maximum continuous 7 A at supply voltage
PHYSICAL
Dimensions - Width: 180mm (7.1in) Height: 140mm (5.5in) Depth: 52mm (2.0in)
Weight - 0.6kg (1.32 lbs)
ENVIRONMENTAL
Relative humidity: Max 93%
Waterproof rating: Connector panel: IPx2, Drive electronics: IPX6
Storage temperature: -30 °C to +70 °C (-22 °F to 158 °F)
Operating temperature: -20 °C to +55 °C (-4 °F to 131 °F)
CONFORMANCE
Standrads: Europe: 2004/108/EC, Australia and New Zealand: C-Tick, COmpliance Level 2
POWER
Power consumption (standby): 300 mA (12V)
Nominal supply voltage: 12V dc
Operating voltage range: 10.8V dc tp 15.6V dc
LEN (NMEA 2000 Load Equivalency Number): 1
OUTPUT
Drive Current Output | Maximum continuous 7 A at supply voltage
PHYSICAL
Dimensions - Width: 180mm (7.1in) Height: 140mm (5.5in) Depth: 52mm (2.0in)
Weight - 0.6kg (1.32 lbs)
ENVIRONMENTAL
Relative humidity: Max 93%
Waterproof rating: Connector panel: IPx2, Drive electronics: IPX6
Storage temperature: -30 °C to +70 °C (-22 °F to 158 °F)
Operating temperature: -20 °C to +55 °C (-4 °F to 131 °F)
CONFORMANCE
Standrads: Europe: 2004/108/EC, Australia and New Zealand: C-Tick, COmpliance Level 2
POWER
Power consumption (standby): 300 mA (12V)
Nominal supply voltage: 12V dc
Operating voltage range: 10.8V dc tp 15.6V dc
LEN (NMEA 2000 Load Equivalency Number): 1
Related Products
-
Type 1 Pump, 12V. to be used with ACU-150 or ACU-200M81120RRP:$2,489.00 Incl. GST
-
-
-
Kit includes S100 Wireless Remote Control, Base Station and Belt Clip.E15024RRP:$1,161.39 Incl. GST
